Safety Instructions; Description And Function; Intended Use; Charging The Powerbank - Goobay 53933 Instrucciones De Uso

Batería externa de carga rápida inalámbrica
Ocultar thumbs Ver también para 53933:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
EN
Wireless Fast Charge Powerbank

1 Safety instructions

The user manual is part of the product and contains
important information for correct use.
• Read the user manual completely and careful-
ly before use.
The user manual must be available for uncertainties
and passing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
Do not operate a device if it is not in working order.
In such cases, it must be secured against unintenti-
onal further use.
• Use product, product parts and accessories only
in perfect condition.
• In case of questions, defects, mechanical da-
mage, trouble and other problems, non-recover-
able by the documentation, contact your dealer
or producer.
• Avoid stresses such as heat and cold, moisture
and direct sunlight, microwaves, vibrations and
mechanical pressure.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation
against accidental use.
Battery hazards
The batteries are not replaceable.
Batteries may be damaged and leak if not used for
the intended purpose.
• Leave leaked, deformed or corroded batteries in-
side the product and dispose it by appropriate
protectives.
• Never throw batteries into a fire.
Extreme heat can lead to explosion and/or leakage
of corrosive liquid.
• Do not deform or disassemble the battery.
Mechanical damage can cause gaseous substan-
ces to escape, which can be highly irritating, flam-
mable or toxic.
• Do not immerse the battery in liquids.
There is a danger of: Explosion, fire, heat, smoke
and/or gas.
• Do not operate the product in an explosive en-
vironment.
Magnetism
The product contains magnetic materials.
• Consult a medical professional before you use
the product to make sure it is compatible with im-
planted medical devices.
• Maintain a minimum distance of 20 cm from me-
dical devices.
• Do not operate and/or store the product near cre-
dit, debit or other bank cards.

2 Description and function

2.1 Product
The product is a mobile auxiliary battery and is used
for charging as well as operating mobile devices via
a cable connection or a wireless charging interface.
REV2021-11-02
Subject to change without notice.
V1.0aw
2.2 Scope of delivery
Wireless Fast Charge Powerbank, Charging cable,
User Manual
2.3 Operating Elements
See Fig. 1.
1 LED status indicator
2 Wireless charging
interface
3 Function button
4 USB-C™ socket

3 Intended use

We do not permit using the device in other
ways like described in chapter „Description
and Function" or in the „Safety Instructions".
Use the product only in dry interior rooms. Not at-
tending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages
to persons and property.
IP20: This product is protected against medium si-
zed foreign objects, but not against water ingress.
4 Preparation
1. Check the scope of delivery for completeness
and integrity.
2. Compare the specifications of all used devices
and ensure compatibility.
5 Connection and operation
5.1 Switching the powerbank on and off
• Press the function button 1x to switch on the po-
werbank.
• Press the function button 2x to switch off the po-
werbank.
The powerbank turns on automatically when you
connect a mobile device. The powerbank switches
off automatically after 30 seconds if no mobile de-
vice is connected.

5.2 Charging the powerbank

The powerbank is supplied partially charged.
Fully charge the powerbank before using it for the
first time!
1. Connect the USB-C™ or Micro-USB socket of
the powerbank to a USB power source via a
charging cable.
This can either be a 230 V USB charging adap-
ter, a 12/24 V car USB charger or the USB socket
of a PC.
2. Disconnect all cable connections after charging.
5.3 Charging a mobile device via cable
connection
1. Connect your mobile device to the USB-C™ so-
cket or one of the USB-A sockets.
Your mobile device will start charging.
It is not recommended to charge multiple mobile
devices at the same time via the powerbank. If se-
veral devices are being charged at the same time,
the Quick Charge function cannot be used.
2. Disconnect all cable connections after charging.
- 4 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
53933
5 USB-A QC 3.0 socket
6 Micro USB socket
7 USB-A plug
8 USB-C™ plug
Goobay® by Wentronic GmbH

Publicidad

Tabla de contenido
loading

Tabla de contenido