Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 2

Enlaces rápidos

IRC-6 (Infrared Remote Control 6) Operation
Note: Make sure to point the IRC-6 directly at the receiver on the product.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.
Press <AUTO> on the IRC-6.
2.
Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1.
Press <SPEED> on the IRC-6.
2.
Press <%>.
3.
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
Press <SOUND> on the IRC-6.
To adjust sound sensitivity in Sound-Active mode:
1.
Press <SENSITIVITY> on the IRC-6.
2.
Press <%>.
3.
Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1.
Press <MANUAL> on the IRC-6.
2.
Press any number between <0> and <9> to choose your color.
To manually control the RGBWA+UV percentage:
1.
Press <MANUAL> on the IRC-6.
2.
Press <R>, <G>, <B>, <W>, <A>, or <UV> (red, green, blue, white, amber, or ultraviolet) to choose your color.
Note: To use the white, amber, or UV color options, the fixture must be capable of outputting that corresponding color
light.
3.
Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
Press <STROBE> on the IRC-6.
1.
2.
Press <+> or <–> to increase or decrease the strobe rate.
3.
Press <STROBE> again to turn off the strobe.
To fade the light output:
Press <FADE> on the IRC-6.
To black out the lights:
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed again.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a
button is pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
These are basic instructions for the IRC-6. See your product's User Manual for more detailed operation.
5200 N.W. 108th Ave., Sunrise, FL 33351 U.S.A. (800) 762-1084 – (954) 577-4455 FAX (954) 929-5560
www.chauvetlighting.com

Publicidad

loading

Resumen de contenidos para Chauvet DJ IRC-6

  • Página 1 Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed again. Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is pressed, try pressing <BLACK OUT>.
  • Página 2: Modo Automático

    • Pulse <BLACK OUT> en el IRC-6. Esto apagará todas las luces hasta que vuelva a pulsar el botón de nuevo. Nota: El IRC-6 no responderá a ninguna acción cuando esté activado el Black Out. Si el mando no responde cuando se pulsa un botón, inténtelo pulsando <BLACK OUT>.
  • Página 3: Mode Automatique

    <BLACKOUT>. Il se pourrait que vous ayez par inadvertance activé la fonction. Ce sont les instructions de base de l'IRC-6. Veuillez consulter le manuel d'utilisation de votre appareil pour un fonctionnement plus détaillé.
  • Página 4: Weitere Funktionen

    So verdunkeln Sie die Leuchten/Lichteffekte: • Drücken Sie auf der IRC-6 auf <BLACK OUT>. Damit schalten Sie alle Leuchten aus, bis diese Taste erneut gedrückt wird. Anmerkung: Die IRC-6 reagiert auf keine Eingabe, solange diese Verdunkelung aktiviert ist. Wenn die Fernbedienung auf das Drücken einer Taste nicht reagiert, überprüfen Sie die Verdungkelungsfunktion.
  • Página 5: Modalità Automatica

    • pulsante. Nota: il telecomando IRC-6 non risponde ad alcun input quando è attivo il Black Out. Se il telecomando non risponde quando viene premuto un pulsante, provare a premere <Black Out>; probabilmente il Black Out era stato attivato involontariamente.
  • Página 6: Automatische Modus

    Om de lichten uit te schakelen: • Druk op <BLACK OUT> op de IRC-6. Dat zal alle lichten uitschakelen totdat opnieuw op de knop wordt gedrukt. Opmerking: De IRC-6 zal niet op invoeren reageren wanneer Black Out geactiveerd is. Indien de afstandsbediening niet reageert wanneer op een knop wordt gedrukt, probeer dan op <BLACK OUT>...