How To Install The Head Cushion; How To Install The Lumbar Support - Clutch Crank Serie Manual Del Usuario

02
Assembly Instructions - How to install the Head Cushion
Method 1 - Feed the straps through the cut outs in the headrest area of
the chair and secure them with the side release plastic buckle.
Method 2 - Place the straps completing around the upper portion of the
backrest and secure them with the side release plastic buckle.
Then tighten the strap to hold the head cushion in the desired position.
Neatly roll/fold the excess strap to about 2 inches wide and tuck it under
the black rubber band.
Method 1
7
01
All manuals and user guides at all-guides.com
Assembly Instructions - How to install the Lumbar Support
The lumbar cushion is designed to rest on the seatpan, it does not physically attach to the chair.
The size and ergonomic design create the perfect support for your lumbar spine. If you prefer the
cushion to sit a little higher on your back you can manually move it up while you are in a seated
position. Simply sit as you normally would then lean forward slightly, position the lumbar cushion
exactly where you want it then lean back and sit normally.
Method 2
English
8