Becken BDW1965N IX Manual De Instalación página 40

Problem
Dishwasher
doesn't work
Drain pump
doesn't stop
Noise
40
Possible causes
Fuse blown or the
circuit breaker acted
Power supply is not
turned on
Water pressure is low
Overflow
Some audible sounds
are normal
Utensils are not
secure in the racks or
something small has
dropped into the rack
Motor is humming
How to proceed
Contact Technical support
(Replace the fuse or reset the
circuit breaker. Remove any other
appliances sharing the same
circuit with the dishwasher)
Make sure the dishwasher
is turned on and the door is
properly closed. Make sure the
power cord is properly plugged
into the wall socket.
Check that the water supply is
properly connected and the water
is turned on.
The system is designed to detect
an overflow. When it does, it shuts
off the circulation pump and turns
on the drain pump.
Sound from detergent container
opening.
Ensure everything is secured in
the dishwasher.
The dishwasher has not been
used regularly. If you do not use
it often, remember to set it to fill
and pump out every week, which
will help keep the seal moist.