Technical Data; Main Components; Safety Precautions - Max 37344 Manual De Instrucciones

TORCH
Introduction
To get the most out of your new torch, please
read through these instructions before use.
Please also save the instructions in case you
need to refer to them at a later date.

Technical data

Power supply:
Light source:

Main components

1. Handle
2. On/off button
3. LED
4. Battery compartment (on rear)
5. COB
1 1
2 2
3 3
4 4
10
3 × 1.5 V AA batteries
(not included)
1 × LED, approx. 60 lm
1 × COB, approx. 85 lm

Safety precautions

Do not look directly at the light, as this may
damage your eyes!
The torch must not be exposed to rain, damp
or water. Do not submerge the torch in
liquids.
The torch must not be used in bathrooms,
in other wet rooms or in other wet or damp
environments.
The torch must not be stored in places
exposed to a high temperature or direct
sunlight.
Remove the batteries from the torch if it is
not going to be used for a prolonged period.
Use
Remove the battery cover.
Insert 3 x 1.5 V AA batteries into the battery
compartment. Check that the batteries are
correctly fi tted.
Replace the battery cover.
Switch on the desired light source (3, 5) in
the torch by pressing the on/off button (2)
one or more times.
Press the on/off button one or more times to
switch the torch off .
5 5