Press and hold the
the
9.7.3. Repeat functions/random playback
During CD playback, press the CD PLAY MODE button on the remote control
until
is shown on the display to repeat the current track continuously.
Press the CD PLAY MODE button on the remote control until
the display to repeat all tracks on the CD.
Press the CD PLAY MODE button on the remote control until
the display to set random playback.
Press the CD PLAY MODE button on the remote control until all the previously
mentioned displays are off to deactivate the repeat and random playback
functions.
9.7.4. Programmed CD playback
You can programme up to 20 tracks to be played back consecutively in a sequence
of your choosing.
First press the STOP/MO/ST button to stop CD playback.
In Stop mode, press the PROG MEM button on the remote control to
programme the tracks. PROG flashes on the display and P01 T00 appears on
the display.
Use the
PROG MEM button on the remote control to save it.
Repeat these steps to programme several tracks.
To confirm and play the programmed playback list, press the controller or the
button on the remote control.
To pause the programmed playback, press the STOP/MO/ST button.
9.8. Connecting devices using the AUX connection
You will need an audio cable with a 3.5 mm jack (not supplied) to connect an
external playback device (e.g. MP3 player).
Set the playback device to a medium volume level and then switch it off.
Plug the 3.5 mm jack into the headphone connection or LINE OUT connection
on the playback device.
Plug the other end of the cable into the AUX port on your radio.
Press the FUNC/USER button or the FUNC button on the remote control
several times until AUX is shown on the display.
Switch on the playback device and start playback from there.
button to rewind within a track; press and hold
button to fast forward within a track.
/
buttons to select the desired track and press the
DE
EN
FR
is shown on
NL
IT
is shown on
ES
63