cable matters 202070 Manual Del Usuario página 7

Switch kvm usb 3.0 para 2 ordenadores con displayport y 3 puertos usb 3.0
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
3.2 Remote Installation
Remove the insulating tab from the end of the battery and
check that the battery is installed correctly
Troubleshooting tips:
Replace the battery
Make sure the Switch is turned on and remote control
is not turned off on the Switch
3.3 Connection Instructions
1. Power off all source equipment
2. Make sure the switch is "OFF" before connecting any device
3. Optional: Connect the included USB-C AC adapter to the USB-C
port and a wall outlet
4. Connect the DisplayPort and micro-B cables from the switch to
each computer. Connect DP 1 and micro-B 1 to computer #1, and
connect DP 2 and micro-B 2 to computer #2
5. Connect the switch box to up to 3 USB peripherals through the
USB-A ports
6. Connect a DisplayPort monitor to the front panel DisplayPort port
www.cablematters.com
5
USB 3.0 KVM Switch for 2 Computers

Publicidad

Tabla de contenido
loading

Tabla de contenido