Datalink+ Software (Per Windows 7/8/Xp/10) - VIO OXY 70 Manual De Instrucciones

P9.3 Backlight Mode
Access this setup menu to select the contrast mode to use for the display backlight:
• INDOOR (In) – Recommended if you use the device indoors.
OUTDOOR (Out) – Recommended if you use the device outdoors.
•
AUTOMATIC (Auto) – Default option. Thanks to the brightness sensor, the display automatically adapts
•
to the environment conditions. This mode also ensures longer battery life.
P9.4 Brightness
Access this setup menu to choose between three different levels of brightness of the display:
• LOW – low
NORMAL – medium
•
HIGH – high
•
Note: Keeping the display bright always adversely affects battery life.
P9.5 Sleep mode
Access this setup menu to select whether and after how long activating the device Sleep mode:
• OFF: Sleep mode off.
2 MIN: The instrument enters Sleep mode if no key is pressed for 2 minutes.
•
5 MIN: The instrument enters Sleep mode if no key is pressed for 5 minutes.
•
When the device is in Sleep mode, the brightness of the display is reduced to a minimum, significantly saving
battery consumption.
Note: Sleep mode only affects the brightness of the display. All other instrumental functions continue to
operate normally (e.g. Data Logger).
To exit from the Sleep mode and return the display to normal brightness, press ANY button.
Once the display brightness is activated, the buttons reacquire their function (paragraph "Key functions").
P9.8 Reset Settings
Access this setup menu to restore the instrument to factory conditions.
IMPORTANT: Restoring the factory parameters does not delete the stored data.
P9.9 Auto off
Access this setup menu to activate or deactivate the auto-shutdown of the instrument:
YES: The instrument automatically turns off after 20 minutes of inactivity.
•
• NO: The instrument remains always on, even if you are not using it.
NOTE: Auto-switch-off of the instrument is disabled, if data is being recorded with the automatic Data
Logger mode .
IMPORTANT: The correct and systematic use of parameters P9.3 / P9.4 / P9.5 / P9.9 allows to
significantly lengthen battery life.
DataLink+ Software
It is possible to connect the instruments of the 70 Vio series to the PC and then use the DataLink + 1.6
software (and later versions) to perform data download, Data Logger directly on PC and exports in .xls (Excel)
and .pdf. The software can be downloaded for free from the web site (pay attention to the correct
installation of the drivers).
https://www.giorgiobormac.com/it/download-software_Download.htm.
•
Connect the USB cable inside each package to the USB port on the top panel of the instrument and the
•
other end to a COM port on the computer.
• Use the USB cable supplied with the instrument only.
Start the program and then switch on the instrument.
•
• Wait for connection to be established (the connection data are shown at the bottom left of the display).
UM Serie Oxy70Vio EN rev.0 28.05.2020
(per Windows 7/8/XP/10)
21
EN