Technical Parameters; After-Sale Service - Charge Ninja Katana Guia De Inicio Rapido

KATANA EV PORTABLE CHARGER
PERFORMANCE
TECHNICIAL SPECIFICATION
This charger has passed all electrical safety performance tests
of European Union CE and North American FCC, and CCC
product safety certification in China.

TECHNICAL PARAMETERS

Model Katana
Input/Output
AC 230V/400V
Voltage
TPU
Cable Material
Operating
50HZ
Frequency
Protection Level
IP66
Intelligent
YES
Current Adjustment
Standard EN 62752
Withstand Voltage
2000V
Service Life
>10000TIMES
Shell Material
ABS+PC plastic shell
Dimention of
300mm(L)*86mm(W)*66mm(H)
Charging Box
Over-voltage Protection
Overload protection
Safety Protection
Leakage Protection
Lightning protection
Human-computer
LED Light
interaction
OPERATING INSTRUCTION
Non-compliance with the operating instructions can have serious
consequences. Manufacturer does not assume any liability for
damage caused disregarding operating instructions or other warnings
on the device itself.
Attention
Attention! High voltage, fire hazard! Never use the
device if the housing is damaged or opened!
This product is not suitable for people with limited mobility,
sensory or psychological disabilities, and is not suitable for
people who lack use experience or a certain degree of
knowledge.
Please do not use this product as a toy. Pls. take good care of
children to ensure that they will not play with this device as
a toy.
Please do not put fingers into the charging connector when
the power plug is still connected.
Do not use the charger if the cables attached or connected
to the device are damaged.
Never use wet or dirty plugs in conjunction with the charger.
Make sure that the connection to which the charger is to be
connected has been properly installed and is undamaged.
The circuit to which the charger is to be connected must be
equipped with a residual current circuit breaker and a circuit
breaker.
The charger may only be used for the purpose of charging EV
in conjunction with the appropriate adapters and cables.
It's important to observe the maximum permissible charging
current of the connection at which you are charging. If you
don't know this, charge with the lowest charge current.
When using adapters, the maximum current for the adapter
has to be observed. If this is not known, use the lowest
charging current.
Maximum power 16.5KW
Input/Output
1*13A, 1*16A,1*32A,3*16A,3*24A
Current
according to socket power
External Ambient
-40℃~+70℃
Temperature
Relative Humidity 5%~95%
Altitude <2000M
Standby Power
<8W
Consumption
Outdoor/ Indoor
Applicable scene
Insulation
>10MΩ
Resistance
Cooling Mode
Natural Cooling
Tightness SILICONE RUBBER
Weight
7KG
Under-Voltage protection
Short Circuit protection
Over temperature protection
Touch panel
An automatic reduction of the charging current by
connecting the adapter is only possible in combination with
the original adapters. Never use adapters whose technical
suitability is unclear.
Never unplug by pulling the cable.
Please keep the power cord away form the heated surface.
Please do not put the power cord in the gap of the closed
door or pull it out of sharp edges or corners.

AFTER-SALE SERVICE

The statutory warranty period of one year shall apply. In the
event of incorrect installation, improper use or incorrect
connection or connection to incorrectly installed electrical
connections and the resultant damage to the product by the
purchaser or other technical defects caused by the
purchaser, the warranty shall lapse or a reduction in value
shall be made. The warranty also expires in the event of any
modification or opening of the system by unauthorized
person. In case of doubt, consult the manufacturer.