Miiego MiiBLASTER Guia De Inicio Rapido página 3

ENG
Pairing your MiiBLASTER MIIEGO® Bluetooth speaker
1: Make sure the speaker is charged and turned OFF.
2: Press and hold the button for 2 seconds until the indicator light flashes
Blue (pairing mode).
3: Activate Bluetooth on your phone or other device and search for Bluetooth
devices and select: MiiBLASTER.
When MiiBLASTER is connected the Blue light is constantly on.
The speaker will remember your phone/device and automatically reconnect
the next time you turn it on.
An unpaired speaker will automatically turn off after 6 minutes.
Charging the MiiBLASTER speaker
Use a 5V/1A or 2A USB adapter for charging.
During charging the 4 LED battery indicator lights will flash one by one. When
fully charged the lights will stay on permanently.
Full charging time is around 4-6 hours with 2A and 6-8 hours with 1A.
Next time charging
When the first battery LED indicator light is flashing every 5 seconds, the
battery status is low and needs charging.
You will then also hear a battery warning tone every 120 seconds.
Turning Your MiiBLASTER On and Off
ON: Press and hold the Button for 2 seconds until a tone is heard.
OFF: Press the Button once and a tone is heard.
Activate Siri on iOS-device: Press and hold the PLAY button for 2-3 seconds
(works only in Bluetooth mode).
Play music from USB or AUX IN mode
Insert USB flash or AUX audio cable on the back of the speaker (in AUX mode
switching songs on +/- buttons is unavailable).
Pairing and connecting 2 x MiiBLASTER speakers with TWS
TWS only works when connecting two MiiBLASTERs by MIIEGO® together.
1: Turn on both speakers (Bluetooth mode). Make sure they are unconnected.
2: Press and hold button 6 on one speaker for 4 seconds. The product emits a
tone to indicate entering TWS-pairing mode.
3: Activate Bluetooth on your audio source and connect with the product. The
product emits three tones and button 6 lights up to indicate successful TWS-
pairing.
2