27.
The appliances are not intended to be operated
control system.
off before replacing the lamp to avoid the
possibility of electric shock.
29.
Accessible parts may become hot during use.
30.
Steam cleaner is not to be used.
metal scrapers to clean the oven door glass since
shattering of the glass.
should be taken to avoid touching heating
elements inside the oven.
34.
Only use the temperature probe recommended for
a temperature-sensing probe.)
to production oils to protect some components.
To Reduce the Risk of Injury to Persons
Grounding Installation
This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
be plugged into an outlet that is properly installed and
grounded.
grounding instructions are not completely understood
risks resulting from becoming entangled in or tripping
over a longer cord.
1) The marked electrical rating of the cord set or
electrical rating of the appliance.
it can be pulled on by children or tripped over
unintentionally.
DANGER
Touching some of the internal components can cause
appliance.
WARNING
Improper use of the grounding can result in electric
properly installed and grounded.
CLEANING
slightly damp cloth.
3.
The door frame and seal and neighbouring parts
they are dirty.
Two-round-pin plug
UTENSILS
There may be certain non-metallic utensils that are not
Utensil Test:
4. Do not exceed 1 minute cooking time.
CAUTION
Personal Injury Hazard
It is hazardous for anyone other than a compentent
person to carry out any service or repair operation that
GB
123