How To Cook - Newlux Air Power V120 Manual Del Usuario

How to cook

1. Select the Preheat menu to preheat the oven (without food).
2. Once the oven is hot, place the food in the oven.
3. Select the desired menu by pressing the chosen menu button.
The menu will flash simultaneously with the On/Off button until
the latter has been pressed in order to start the preparation. The
control panel will display the default temperature and time.
4. Select the temperature by pressing the [+] or [-] buttons. It is
recommended to follow the temperature settings shown in the
menu and control panel section.
5. Select the cooking time by pressing the [+] and [-] buttons which
increase or decrease by 1 minute each time you press each button.
It is recommended to follow the times shown in the menus and
control panel section.
6. Once the menu, time and temperature have been selected, press
the On/Off button to start cooking.
7. Once the cooking process has started, you can modify the
temperature and time settings by pressing the [+] and [-]
temperature or time buttons to make the adjustments you need.
8. At the end of the cooking time, the fan will continue to run until the
appliance cools down. Then OFF will flash on and off on the display.
After approximately 20 seconds, the appliance will beep 3 times
and the OFF light will turn off and the oven will return to stand-by
mode.
9. If you have used the rotating basket or the carving tray during
cooking, remove the basket or carving tray with the grill handle.
Unlock the basket or carving tray using the release button. If you
have used the trays, remove them and place them on a heat-
resistant surface.
IMPORTANT:
NEVER touch the appliance during and after its operation since the
temperature will be very high. Use oven gloves if necessary.
| 30
When removing food be careful with hot steam and