Publicidad
Idiomas disponibles
Idiomas disponibles
•
After cleaning and maintenance, install all guards and protective devices
and check that they are in full working order.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with your product can be found at your
Hilti Store or online at: www.hilti.group
7.1 Cleaning the safety guard
1. Remove the saw blade before cleaning the safety guard parts.
2. Clean the safety guard parts carefully with a dry brush.
3. Use a suitable tool to remove deposits or cuttings from the inside
surfaces of the safety guard parts.
4. Fit the saw blade.
7.2 Checks after cleaning and maintenance
After cleaning or maintenance, check that all safety devices are fitted
and that they function faultlessly.
▶ To check operation of the lower guard, use the operating lever to open
it fully.
▶ The lower guard must close quickly and completely when the oper-
ating lever is released.
8
Transport and storage of cordless tools and batteries
Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery/batteries.
▶ Never transport batteries loose and unprotected.
batteries should be protected from excessive shock and vibration and
isolated from any conductive materials or other batteries that may come
in contact with the terminals and cause a short circuit. Comply with the
locally applicable regulations for transporting batteries.
▶ Do not send batteries through the mail.
instructions on how to ship undamaged batteries.
▶ Prior to each use and before and after prolonged transport, check the
product and the batteries for damage.
20
English
During transport,
Consult your shipper for
2264106
*2264106*
Publicidad
