Repeat Playback - RCA RS3698BL Manual De Usuario

PLAYBACK VIA BLUETOOTH® ENABLED DEVICES
INITIAL DEVICE PAIRING AND CONNECTION
In order to pair and connect your Bluetooth® device for the first time:
1. Press the button or
" icon flashes which means the unit is in Bluetooth® mode and ready to pair.
2. Turn on the Bluetooth®device you wish to pair and connect, and search for the "CD Stereo System" in the list
of discovered devices and select it, you will hear a voice "Pairing". (It may take the unit and Bluetooth®enabled
device a few seconds to pair.)
3. When the " " icon lights up, the unit and the Bluetooth® enabled device are now paired and connected, and
a voice "Audio devices connected" to be heard.
4. You can now enjoy audio from the unit.
Notes :
If your Bluetooth device (e.g. Smart phone etc.) needs the PIN code while pairing, please enter 4-digit number: 0000.
The unit can only be connected to one Bluetooth® device at a time.
The unit will memorize the last paired device. To reset it, press and hold the
3 seconds until the " " icon starts flashing rapidly to wait for pairing.
RECONNECTING A BLUETOOTH® ENABLED DEVICE
Bluetooth® enabled devices must be reconnected when the device has been turned off or the unit has been
turned off.
1. Turn on the Bluetooth® device that has already been paired with the unit.
2. Press the SOURCE button to Bluetooth® mode and "
and starts flashing rapidly, and it auto searches for the last paired Bluetooth® device in memory.
3. Depending on your Bluetooth® device, your device may automatically connect to the unit.
If the device does not automatically connect to the unit, press and hold the
control for 3 seconds until the "
list of your Bluetooth® devices and select it.
4. Once the " " icon light up, the Bluetooth® enabled device is paired and connected.
5. You can now enjoy audio from the unit.
PAIR AND CONNECT WITH ANOTHER NEW DEVICE
In order to pair the unit to a new device, press and hold the
the " " icon starts fl ashing rapidly and then follow the initial device pairing and connection instructions above.
1. Press the SOURCE button to CD mode. "
2. Press the OPEN/CLOSE button to open the CD door. '
with the label side up and then press the
is shown on the display.
3. Press the PLAY/PAUSE button to start playing.
Note : When no disc, the display shows "- -" .
Repeat Current Track
Press the /MEM.UP button until "
Repeat the Entire CD
Press the /MEM.UP button until "
Cancel Playback Mode
Press the /MEM.UP button until "
RS3698BL_IB_E&E&F_020_M1.indd 5 RS3698BL_IB_E&E&F_020_M1.indd 5
SOURCE button to Bluetooth® mode and "
" icon starts flashing rapidly, then search for the
CD PLAYBACK
" appears and "- -" blinks on the display.
OPEN/CLOSE button to close the CD door. Then the total track no.

REPEAT PLAYBACK

" blinks on the display. The current track will be played repeatedly.
" stops blinking and remains on. All tracks will be played repeatedly.
" disappears.
EN - 5
"icon is shown on the display. The "
button on the remote control for
" icon is shown on the display. The "
PAIR button on the remote
"CD Stereo
button on the remote control for 3 seconds until
' is flashing on the display. Place a disc in the center
EN EN
" icon flashes
System" in its
3/11/2019 4:53:41 PM 3/11/2019 4:53:41 PM