Product Maintenance - Sinbo SSI 2893G Manual De Instrucciones

6. After ironing the front of clothes, turn the clothes over to iron its back.
When the steam tube bending, it happen to emit cooing sound. Water bead may be appeared on the
steam holes and the amount of steam will decrease significantly. Lift the handle for 2-3 seconds in
this case, everything will be ok.

PRODUCT MAINTENANCE

1. Purified water is recommended in order to avoid contaminating the textiles.
The contents of mineral substance differ in various kinds of water, so there would be sediments to
respective extents if the ironing machine is applied with water of different qualities, which makes the
steam flow lessens, intermits or even stops. Purified water is recommended in order to avoid contaminating
the textiles.
2. To better maintain the machine, the machine, when used for a certain period, may be cleaned or
maintained as follows, in which we suggest to take the both steps together:
* Cleaning the water tank
>>> Related parts: water tank and tank filter
>>> Cleaning frequency: Clean every 1 month or 20L water is consumed, which period may be
prolonged or shortened according to the actual water quality.
>>> Cleaning steps:
1. Screw out counterclockwise the water tank cover;
2. Pour the remnant water out of the tank;
Rinse with clear water the water tank cover as well as the water tank, after which, put the cover back
into the bottom of tank and tighten it clockwise.
* Using the water outlet to clean the heating element
>>> Related parts: heating element, metal cleaning plug
>>>Cleaning frequency: Clean every 1 month or 20L water is consumed, which period may be
prolonged or shortened according to the actual water quality.
>>> Precautions: Before cleaning, turn off the power supply, pull out the plug and let the machine
cool down.
>>> Cleaning steps:
Turn off the power supply, pull out the plug, take down the support pole ?the ironing brush and tank,
pour the remnant water, turn over the machine body on carpet (to avoid scratching the machine), screw
out counterclockwise the cleaning plug and take it out.
Rinse the cleaning plug, and get the sediments out of the plug, Then infunde the appropriate water into
steam port, clean the boiler. After which, put the cleaning plug back.
- 15 -