How To Use - Nevir NVR-5126A Manual De Instrucciones

IV. How to use
1. Preparation
(1) Let the end of the hose insert into the air intake socket clockwise 90° until
clicking position.
(2)After using, turn the hose with anti-clockwise 90° and pull the end out.
(3)Fit the extension tube to the handle, tube and tube to floor brush as showing
in the picture.
2.Using the machine
Pull out the wire to suitable length, insert the plug into power socket.
Then make the speed control button on MIN, press the switch to run the
machine. The vacuum cleaner begins to work. The part, which can adjust
wind volume, is on the handle. The speed control can adjust the power.
*Attention: Don't extend the cable beyond the RED mark.