specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
10
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
DIE GRINDERS
SAVE THESE INSTRUCTIONS AND MAKE THEM
AVAILABLE TO OTHER USERS AND OWNERS OF
THIS TOOL!
• Accessories must be rated for at least the
speed recommended on the tool warning la-
bel. Wheels and other accessories running over
rated speed can fly apart and cause injury.
• Hold tools by insulated gripping surfaces
when performing an operation where the cut-
ting tool may contact hidden wiring or its own
cord. Contact with a "live" wire will make ex-
posed metal parts of the tool "live" and shock
the operator.
• ALWAYS wear ear protectors when using the
tool for extended periods. Prolonged exposure
to high intensity noise can cause hearing loss.
• NEVER touch moving parts. NEVER place your
hands, fingers or other body parts near the
tool's moving parts.
• NEVER operate without all guards in place.
NEVER operate this tool without all guards or
safety features in place and in proper working
order. If maintenance or servicing requires the
removal of a guard or safety feature, be sure
to replace the guard or safety feature before
resuming operation of the tool.
• Use the right tool. Don't force small tool or
attachment to do the job of a heavy-duty tool.
Don't use tool for purpose not intended —for
example— don't use circular saw for cutting
tree limbs or logs.
• NEVER use a power tool for applications
other than those specified. NEVER use a power
tool for applications other than those specified
in the Instruction Manual.
• Handle tool correctly. Operate the tool ac-
cording to the instructions provided herein.
Do not drop or throw the tool. NEVER allow