Stopping Playback; Pausing Playback - Esoteric SA-50 Manual Del Usuario

1
1 Press the POWER button to turn the unit on.
The indicator ring lights.
2 Press the OPEN/CLOSE button to open the tray.
The tray opens toward you.
3 Insert the disc label side up.
< Make sure the disc is clean, free from scratches and is centered in
the tray in order to avoid any malfunction or jamming of the tray or
damage to the disc.
4 Press the OPEN/CLOSE button again to close the tray.
The tray will close. Be careful not to pinch your fingers.
< The unit then reads the disc and the indicator ring of the STOP
button lights (this may take a little time as the mechanism loads
and clamps the disc).
5
Press the PLAY button to start playback.
During playback, the indicator ring of the PLAY button lights.
Playback (1)
2
3 4 5

Pausing playback

Press the PAUSE button to pause playback.
The indicator ring of the PLAY button blinks.
Press the PLAY button or the PAUSE button to restart playback.

Stopping playback

During playback, press the STOP button to stop playback.
Opening and closing the tray
Pressing the OPEN/CLOSE button opens the tray if it is closed, and
closes the tray if it is opened.
< When the OPEN/CLOSE button is pressed during playback, it may
take a few seconds before the disc is "unloaded" and the tray opens.
13