Voice Operated Transmission (Vox) - Easypix OkiDoki Manual Del Usuario

action. The Call Alert Tone will be automatically transmitted for a factory-set fixed
length of time. During transmission, the Call icon<TX> + <CALL> appears on the
display. You'll hear a brief Call Alert Tone to confirm operation. The
communicator returns to standby mode when the Call Tone sequence is completed.
For optimum performance, please make sure the ANTENNA is pointing upright.
1．Enter to Menu mode. Advance through the Menu until the VOX icon appears on
the display.
2．Press the Up or Down key to toggle between on and Off function of the VOX.
When VOX feature is on, the VOX icon will appear on the LCD display.
3．To exit the Menu, press the Red Button.
This device is equipped with an adjustable Voice Operated Transmitter(VOX) that
can be used for automatic voice transmission. In this convenient mode,
transmission is automatically initiated by speaking into the microphone. There is no
need to push the Red Button.
1．Set your communicator to VOX Mode;
2．Lift the headset/Charger jack Cover Located at the side of your unit ;
3．Insert the Ear Bud Jack into the headset Jack. Wear the Ear bud and adjust the
Microphone location;
4． Press the PTT call key to speak; and speak to the microphone directly if the VOX
function is on.
The device's LCD backlight display automatically lights up for 5 seconds with the
press of any key.
To adjust VOX level

Voice Operated Transmission (VOX)

Use the Ear Bud
The Backlit Display Feature