Display; Display Angle - Sharp UP-V5500 Manual Tecnico

All manuals and user guides at all-guides.com
How to open the side cover
While moving the side cover release lever toward
you, pull the side cover and rotate the cover upward
as shown in the illustration at the right.
Connectors under the side cover
(for connection with printer etc.)
Audio Output
Rear IO Port
COM PORT

DISPLAY

Display angle

The display may be tilted for the best viewing angle.
The allowable angle of display is within 53 degrees as illustrated at
the right.
CAUTION:
Do not pull the display beyond the maximum tilt angle nor apply excessive pressure to the display.
Make sure to hold the body when pulling the display so that the terminal may not move.
CAUTION:
The LCD module built in this POS terminal is manufactured with highly precise technology, however
bright pixels or blank pixels may appear. Also an irregular color and brightness may occur depending
on the view angle. Please note that this type of phenomena is common for LCDs and may not be a
malfunction.
The backlight in the display is a consumable part.
When the LCD display can no longer be adjusted and becomes darker, you should replace the LCD
module. Consult your authorized SHARP dealer for further details.
Parallel port
CBX Port
(for connection of VCT cash
PORT External
Customer Display
COM PORT 2
PORT for Internal
COM PORT 3
Customer Display
SHARP UP-I20DP
③
②
① Side cover release lever
(located at the bottom cabinet)
UBS Ports
(for connection with CD-ROM drive
unit, FDD unit, mouse, etc.)
COM PORT 4
(for connection with scanner etc.)
LAN PORT (RJ45l)
VGA PORT (2 nd
SHARP Drawer
Connector
53°
6