Connection Instructions - auna W2-AC200 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN
14

CONNECTION INSTRUCTIONS

1. Connecting the power cable
As this is a high-current device, the correct connection of the power
cable is very important.
Connect the red cable to the (+) terminal of your battery using the cable
with the fuse holder.
Connect the black cable firmly to a screw or another part of the
bodywork of your car after you have removed the coating from this
area. This is necessary for proper earthing.
Proper wiring results in clear sound.
2. Connection of the remote on/off cable
Connect the orange cable to a switched power cable of the car radio.
This controls the switching on and off of the amplifier.
The cable for the automatic antenna on the radio (if present) can be
used for this purpose.
3. Amplifier input connection
This device can be used with all car radios that have high power outputs.
Separate basic car radio connection: Connect the car radio speaker
output cables to the high-power inputs +/- right and left.
General car radio connection: Connect the negative car radio speaker
output cable to the two remaining cables +/- right and left.
4. Connecting the AUX port:
Connect the AUX input cable to the cinch connector as described:
"White" to the left cinch output and "Red" to the right cinch output of the
car radio.
Before connecting the RCA output of the car radio or other equipment,
make sure that the impedance and sensitivity match this AUX
connection.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10004929

Tabla de contenido