DUROFIX RI60176 Manual Información Del Producto página 12

tighten securely.
5. To remove the side handle, loosen the side handle knob until the side handle can
be removed.
Knob
Detents
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil. (see Fig. 3)
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket.
1. Pull out the socket from the anvil directly. (see Fig. 3)
CAUTION
1English1
Fig. 3
Always set switch (4) to off position when installing and
removing socket.
English
Groove
Fig. 2
-11