Safco PanelMate 4158 Instrucciones De Montaje

PARTS LIST
LETTER
DESCRIPTION
CODE
A
Frame
B
Tray
C
White Board
D
Wire Hangers
E
Hanger Tips
For questions or concerns, please call
Safco Consumer Hot Line 1-800-664-0042
available Monday-Friday 8:00 AM to 4:30 PM (Central Time)
1
Remove E Hanger Tips from the bottoms of D Wire
Hangers as shown below. Insert each wire hanger into
the two built-in clamps on each side by gently
pressing the clamp tabs down until the hangers are in
position. Replace the Hanger Tips onto the
bottoms of both of the
Wire Hangers.
Hanger
Clamp Tabs
4158-37: 1 of 1; 02/99
PanelMate
ASSEMBLY INSTRUCTIONS
QTY. PART NO.
1 4158-01
1 4158-02
1 4158-03
2 4158-04
4 4158-08
Dry-Erase Markers
on the White Board
ASSEMBLED UNIT
(English-speaking operators)
Tips
Safco Products Company, New Hope, MN 55428
Dry-Erase Board
®
WARNING:
Use ONLY
surface.
2
Hang the Dry-Erase Board onto your office panel wall
unit. Adjust the position of your Dry-Erase Board on
your wall by grasping the unit in both hands with the
back side facing away from you. With two fingers of
each hand simultaneously press the four clamp tabs
in and slide the unit up or down wire hangers to the
desired position, then release
the clamp tabs.
MODEL
NUMBER
D
E
A
C
B
BACK VIEW
4158
Clamp Tabs