English; Pairing And Connecting; Control Buttons And Indicators; Battery And Charging - Noontec zoro II Wireless Manual Del Usuario

User Manual

1. English

Please read this user manual before using this product. For more information, please
visit www.noontec.com

1.1 pairing and connecting

1. Enable the Bluetooth of the music player and turn on the power of this Headphone;
2. From Bluetooth device list of the music player, select "ZORO II wireless" to pair;
3. If your player requires password, please input 0000 and click OK for connection. Some devices may require
the user to accept the connection.
4. If restarting this device after powering off, it will connect the player automatically.

1.2 Control buttons and indicators

Micro USB interface
Interface of audio cable
NFC

1.3 Battery and charging

This product is built in chargeable lithium battery which can power the headphone for 35hours as long as it is
fully charged. Charging mode of headphone: it is charged by micro USB interface with the charging voltage of
5V. It generally takes 2hr to fully charge it. The headphone has four charging indicators with each one
representing 25% electric volume. Press
volume is too low, the headphone will emit a beep to remind the user to charge it.

1.4 Technical parameters

Type: Closed-back Dynamic
impendence: 32Ω
the maximum power: 60mW
weight: 210g
supporting apt-X technology
All manuals and user guides at all-guides.com
Long press for 3s to power on/long press for 3s to power off with tone notice at the
same time.
Press it once to play music and press it once again to suspend playing music.
Press it once to answer/refuse the call.
Press it twice to display the electric volume of battery.
Short press it to volume up.
Long press it to previous song.
Short press it to volume down.
Long press it to the next song.
Status Indicator;flashing: Searching for Bluetooth device
On: Bluetooth connection succeeded
Charging indicators;flashing: being charged
on: charging finished.
Charging interface
Audio input interface under wire working mode
NFC sensing region
twice to display the rest electric volume. Note: If the electric
Sensitivity: 108dB (at 1kHz 1mW)
rated power: 30mW
Frequency response: 13-26KHz
mode of wireless transmission: Bluetooth 4.0 with NFC
transmission distance: 10m in maximum
3