POWER SMITH PWLS070H Manual Del Operario página 3

IMPORTANT SAFETY INSTRUCTIONS
•
Use only with an extension cord for outdoor use,
such as an extension cord of cord type: SW, SW-A, SOW,
SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A,
SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
•
Do not look directly at the lighted lamps to avoid eye
injuries.
•
Always keep the work light away from any
flammable surface or materials.
•
Always check damaged or worn-out parts before
using the work light. Broken parts will affect the work
light operation. Replace or repair damaged or worn
parts immediately. If repairs are needed, consult a
professional electrician.
•
Do not use a pressure washer to clean this product.
•
Do not modify the work light in any way. Unauthorized
modification may impair the function and/or safety and
could affect the life of the product. There are specific
applications for which the work light was designed.
•
Store work light in a secure place out of the reach of
children. Inspect it for good working condition prior to
storage and before re-use.
California ProPosition 65 Warning
This product can expose you to Lead and other chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Wash your hands after
handling. For more information go to www.P65Warnings.
ca.gov.
ASSEMBLY INSTRUCTIONS
attacHInG WoRk LIGHt HeaD to
stanD
1.
Place the stand (9) on a flat surface.
2.
Position the U-Shaped bracket (3) of the work light head
against the stand (9) as shown in FIG 1.
3.
Use the locking knob (6), flat washer and spring washer
to secure the work light head on the stand.
caUtIon:
•
Keep the metal parts of light away from any live power
source.
•
Prior to installation and maintenance of the light,
disconnect the light from power source to prevent
electric shock.
•
Installing and operating the light in harsh environments
may shorten the lifespan and/or damage the light.
•
Keep the light away from any corrosive substance and
only clean with dry cloth and non-abrasive cleaner.
•
To ensure personal safety, make sure the light is
mounted firmly and securely when installed in a high
position.
English
aDJUstInG tHe LIGHt DIRectIon
Your work light can be tilted vertically from 30° down to
90° up.
to adjust the light Direction, loosen the side locking
knobs (5). Adjust the work light head to desired position,
and retighten knobs.
sWItcH actIon
Your work light is equipped with an On/Off switch (7) located
on the back side of the work light. Press the switch once to
turn the work light on and press the switch a second time to
turn it off. Always turn the work light off before unplugging.
WaRnInG:
is unplugged and completely cool before attempting to
clean it.
Your work light requires very little care and maintenance.
Simply clean the lens regularly with a non-abrasive cleaner.
This product is warranted free from defects in material and
workmanship for 5 (Five) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to
returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith
product,
Please call Toll-Free:
Or visit our website:
www.
powersmithproducts.com
3
OPERATION
MAINTENANCE
Always make sure the work light
WARRANTY
HELP LINE
888-552-8665.
®