Working Instruction (See Figure E); Maintenance And Service - Bosch ALB 18 LI Manual Original

Ocultar thumbs Ver también para ALB 18 LI:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
12 | English
Disassembling (see figure B)
Press button (3) in and remove the nozzle (4).
Troubleshooting
Problem
Possible Cause
Machine fails to oper-
Battery discharged
ate
Battery not fully connected
Battery too hot/cold
Machine defective
Garden tool functions
On/Off switch defective
intermittently
Controller for airflow speed damaged
Excessive vibrations/
Machine defective
noise
Run time per battery
Battery has not been used for long period or only
charge too low
for short terms
Battery defective
Machine does not blow Tube obstructed
Tube cannot be moun-
Incorrect assembly
ted on the machine

Maintenance and Service

Maintenance, Cleaning and Storage
Before any work on the garden product itself (e. g.
u
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
garden product. There is danger of injury when uninten-
tionally actuating the On/Off switch.
For safe and proper working, always keep the product
u
clean.
Do not place other objects on the garden product.
To ensure safe and efficient operation, always keep the
product and the ventilation slots clean.
Never spray the product with water.
Never immerse the product in water.
Store the product in a secure, dry place, out of the reach of
children.
Do not place other objects on the product.
Keep all nuts, bolts and screws tight to ensure safe working
with the product.
Inspect the product and replace worn or damaged parts for
safety.
Ensure replacement parts fitted are Bosch-approved.
F 016 L94 354 | (12.01.2022)

Working instruction (see figure E)

When operating, always hold the machine approximately
3 cm above the ground.
Do not blow hot, flammable or explosive material.
Corrective Measure
Recharge battery
Insert the battery correctly (see figure C)
Allow to cool/warm
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Charge battery completely
Replace battery
Clear tube
Mount the tube correctly (see figure B)
Battery Maintenance
Use the following procedures to enable optimum usage of
the battery:
– Protect the battery against moisture and water.
– Store the machine and battery only within a temperature
range between –20 °C and 50 °C . As an example, do not
leave the battery in the car in summer.
– It is recommended that the battery is not stored within
the product but stored separately.
– Do not leave the battery in the product in direct sunlight.
– The ideal storage condition for the battery is 5 °C.
– Occasionally clean the venting slots of the battery using a
soft, clean and dry brush.
A significantly reduced working period after charging indic-
ates that the battery is used and must be replaced.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Tabla de contenido