Philips AVENT SCF355 Manual Del Usuario página 13

Note: The food or milk may feel cool to you, but for a newborn baby its
temperature is very pleasant.
Cleaning and descaling
Cleaning
1 After each use, unplug the bottle warmer and let it cool
down (Fig. 12).
2 Remove the water from the bottle warmer for hygienic
reasons (Fig. 13).
3 Wipe the outside and inside of the bottle warmer with a moist
cloth (Fig. 14).
Do not use abrasive, anti-bacterial cleaning agents, chemical solvents or
sharp tools to clean the bottle warmer.
Note: If you used the bottle warmer to warm containers with baby food, make
sure that no spilled baby food remains on the bottom of the bottle warmer.
Descaling
It is recommended to descale the bottle warmer every four weeks
to ensure it continues to work efficiently.
1 Mix 10 grams of citric acid with 200ml/7oz of cold water and pour
it into the bottle warmer. Switch on the bottle warmer and select
the milk warming setting for contents under 180ml/6oz for
10 minutes. Leave the solution in the bottle warmer until all
limescale has dissolved. You can purchase citric acid (SCF943)
at www.shop.philips.com/service. (Fig. 15)
Note: You can also mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of
cold water to descale the appliance.
2 Unplug the bottle warmer before you empty it (Fig. 12).
3 Empty the bottle warmer and rinse its inside thoroughly.
If you still see traces of scale after rinsing, repeat the descaling
procedure (Fig. 13).
All manuals and user guides at all-guides.com
ENGLISH
13