Introduction..................................................................... 6
Safety..............................................................................7
Assembly........................................................................ 9
Operation........................................................................ 9
Maintenance................................................................. 10
Product overview
(Fig. 1)
1. Engine
2. Tine blade cover
3. Handle
4. Extension cover
5. Tine blades
6. Drag bar
7. Top cover
8. Locking handle
9. Bumper
10. Clutch control
11. Throttle control
12. Reverse control
13. Side cover
14. Cable cover
15. Connector joint
16. Tine blade holder (primary)
17. Tine blade holder (secondary)
18. Tine cover bracket, front
19. Gear lever
20. Wheel kit
21. Tine cover bracket, rear
22. Rubber holder
23. Connecting plate
24. ON/OFF switch
25. Hardware bag
26. Hardware bag (for tine blades only)
27. Tool bag
Symbols on the product
(Fig. 2)
WARNING: Be careful and use the product
correctly. This product can cause serious
injury or death to the operator or others.
(Fig. 3)
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
6
Contents
Technical data.............................................................. 12
Accessories.................................................................. 12
Introduction
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
(Fig. 13)
(Fig. 14)
(Fig. 15)
(Fig. 16)
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Use approved hearing protection and
approved eye protection.
Fast.
Slow.
Stop the engine and remove the ignition
cable before repairs or maintenance.
Warning: Rotating parts. Keep hands and
feet clear.
Keep your distance!
Neutral gear.
Reverse gear.
Fast forward.
Slow forward.
Low speed.
High speed.
This product complies with applicable EU
Directives.
1628 - 003 - 26.01.2022