Troubleshooting - Logic3 i-Station TimeCube Manual Del Usuario

5. Press and hold the 'Preset/Set' button (Program number will then flash)
6. Using the 'Tuning' or 'Volume' buttons set the Program number you wish to save the radio station to.
7. Press the 'Preset/Set' button to save the settings.
To Recall a Preset Radio Station
1. Press the 'Preset/Set' Button and the Program number will appear on the display
2. Pressing the 'Preset/Set' button again will toggle through the Preset stations (P1, P2, P3, P4, P5, P6)
3. If no buttons are pressed for 10seconds the display will return to the current time display
Switching Off the Alarm/Snooze Function
1. Press the 'Snooze/Dimmer' button when the alarm is ringing, the alarm will be silenced for 5minutes.
2. To switch OFF the Alarm when the Alarm has gone off Press the 'On/Off' button.
Selecting a source (iPhone/iPod, Radio or AUX)
1. Press the 'On/Off' button.
2. Press the 'Source' button until you have selected your source
To adjust the Display dimmer level
1. Press the 'Snooze/Dimmer' button (when the alarm is not ringing), there are 3 levels of dimming.
Set Up of Line in
The i-Station TimeCube also offers the ability to allow other portable audio devices such as iPod shuffle,
MP3, MiniDisc and Portable CD Players to be connected for use as a speaker system.
1. Connect a 3.5mm Audio-In cable into the headphone socket of your audio device and to the 'Line
IN' connection on the back of the unit.
2. Press the 'SOURCE' button to select the 'AUX' function. The 'AUX' symbol will appear on the front
display.
3. You can now use the WIS191 to play sound from your external audio devices.
NOTE: Remember to remove the line in cable when using the docking station as the line in
cable will override any sound coming from the docking station.
Trouble Shooting
Problem What Should I do?
FM Radio not clear / Radio
Re-position the antenna cable until the station sounds clearer
station not found
Ensure the 7 or 5 day alarm setting is active (see Setting of
Alarm is not ringing daily
Alarm)
iPod/iPhone is not waking up as Ensure the Alarm source is set to iPod/iPhone
the Alarm (see Setting of Alarm)
All manuals and user guides at all-guides.com
4
Ensure the correct cradle is used with your iPhone/iPod.
Ensure the line in cable is not plugged into the rear of the
TimeCube
No Sound
Check Play status on the iPhone/iPod.
Please try updating the firmware for your iPhone/iPod using
the latest iTunes which is available from www.apple.com/ipod/
download
Spare Part List
Part No. Item code Item Name
1 YAD011B AC ADAPTOR (UK 3PIN PLUG)
2 YAD011E AC ADAPTOR (EURO 2PIN PLUG)
Please use Item Codes above, when searching for Spare Parts on our Website www.logic3.com
Should you have any setup problems with the i-Station TimeCube (WIS191) please contact our
Technical Support Hotline on +44 (01923) 471000 – national/International call rates apply or Email
support@logic3.com - Spare parts are available for some models at our website www.logic3.com
Price
For prices visit our website at
www.logic3.com
5