Safety And Compliance - AmazonBasics B072PZBHTY Guía De Bienvenida

Safety and Compliance

• Warning: Because mounting surface materials can vary widely, it is imperative that you make
sure mounting surface is strong enough to handle mounted product and equipment.
• Warning: DO NOT place hands on or near support bars. Pinch points
are created during lifting and lowering the worksurface. Failure to follow
these instructions may result in serious personal injury.
• Warning: Impact Hazard! Moving Parts can Crush and Cut. Raise this
product to its full up position before lifting off the desk.
• Two people are required to lift this product off the desk.
• Do not tip this product on its side or upside down. This product must
remain upright at all times.
• Failure to heed this warning may cause unintended motion of the lift
mechanism resulting in possible serious personal injury and or property
damage!
• Warning: Impact Hazard! Moving Parts can Crush and Cut.
• Raise worksurface to top of vertical adjustment BEFORE removing
equipment.
• Failure to heed this warning may result in serious personal injury and or
property damage!
• Caution: To avoid the potential to pinch cables it is important to follow
the cable routing instructions in this manual. Failure to follow these
instructions may result in equipment damage or personal injury.
• Caution: Leave enough slack in cable to allow for full range of vertical
motion (15" / 38 cm). Failure to heed this warning may result in property
damage and or personal injury.
10