Presentation, Use And Conservation Of The Manual; Start Up; Warnings And Safety Precautions; Installation - Rossi RR55 OD Manual De Instrucciones

2) INTRODUCTION: USE AND CONSERVATION OF THE MANUAL
The dosing grinder is an appliance for coffee bean grinding therefore any other use will be considered
unsuitable and hazardous. The user must be an adult. He must comply with the safety regulations in force,
ensuring that routine maintenance and cleaning are carried out regularly. The customer is responsible for
the people authorized to use the appliance and for the correct use and conservation of the manual.
ATTENTION.: the manufacturer reserves the right to make any necessary technical changes on the product
and on the manual without prior notice.
3) START-UP

Warnings and safety precautions

The manufacturer has obviously taken every possible precaution to guarantee the user's safety but the
different installation and/or transport conditions could give rise to uncont rollable or unpredictable
situations. For that reason it is always necessary to assess possible hidden hazards and to consider the
following suggestions:
•
the packing elements ( cardboard, cellophane, metal staples, etc. ) can cause accidents if not
carafully handled ;
•
any fault or defect must be promptly notified to the authorized and qualified personnel;
•
an earth connection is mandatory;
•
the use of extensions or flying connections is forbidden;
•
check the condition of the components;
•
ensure that the power supply voltage reported on the technical data label is the same as that of
the main supply network to be used in the place of installation.

Installation

•
Place bean hopper in the grind adjustment dial so that the hole corresponds with the screw. Fix the
screw so that the bean hopper can not be removed;
•
turn the grind adjustment dial clockwise untill grindstones touch;
•
turn dial back counterclockwise five (5) notches;
•
the grinder should now be set to the correct grind (slight adjustments may be necessary);
•
place whole coffee beans into the hopper and make sure that the sheet (4) is in the close or open
position as needed;
•
insert the plug of the grinder in the power socket making sure the voltage corresponds;
•
after having carried the out the electrical connection, open the sheet (4) and start grinding by
pressing the push-button.
ATTENTION: after stop, the grindstones will continue to rotate for a few seconds.
ATTENTION: THE GRINDER MUST NEVER BE LEFT IN FUNCTION WITHOUT COFFEE.
Rev. 01 - 01.2009
All manuals and user guides at all-guides.com
18
I - F - GB - ES