Resetting The Picture Settings To The Factory Defaults - Samsung 3 Serie Manual Del Usuario

Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the blue signal
only by removing the red and green signals from the video signal so as to provide a Blue
Filter effect that is used to adjust the Color and Tint of video equipment such as DVD
players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1. F ollow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 21).
2. Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENtER
3. Press the ▲ or ▼ button to select "Off" or "On", then press the ENtER
Press the ExIt button to exit.
"Blue Only Mode" is available when the picture mode is set to "Movie" or
"Standard".

Resetting the Picture Settings to the factory Defaults

1. Press the MENU button to display the menu.
Press the ENtER
button, to select "Picture".
2. Press the ▲ or ▼ button to select "Reset", then press the ENtER
Press the ▲ or ▼ button to select "OK" or "Cancel" then press the ENtER
Press the ExIt button to exit.
Each mode can be reset.
All manuals and user guides at all-guides.com
English - 4
tV
Color Tone
Size
Digital NR
DNle
HDMI Black Level
Blue Only Mode
Move
tV
button.
Color tone
Size
Digital NR
DNle
hDMI Black Level
Blue Only Mode
button.
Move
tV
Mode
Backlight
Contrast
button.
Brightness
Sharpness
button.
Color
tint
Detailed Settings
Picture Options
Reset
Move
Picture Options
: Normal ►
: 16:9 ►
: Auto ►
: Off ►
: Normal ►
: Off ►
Enter Return
Picture Options
: Normal
: 6:
: Auto
: Off
: Normal
: Off
Off
On
Enter Return
Picture
: Standard


4
40
0
G 0 R 0
: OK
OK
Cancel
Enter Return