Topcom HHM-2100H Manual De Usuario página 6

TOPCOM Handheld Massager 2100H
4.2 Using the massager
• Plug the end of the power cord
the power supply must be close and accessible.
• Slide the On/Off switch
• Slide the On/Off switch
The infrared heating will be activated along with the vibration. It will take a few minutes to
heat up the massage head surface.
The heating function will heat the massage head
It is only for giving extra comfort during massage. More excessive heating could lead to
injuries.
4.3 Vibration intensity
When the massager is active, the intensity can be changed by sliding the Intensity switch
to 'High' for hard intensity or 'Lo' for a soft massage.
4.4 Removing the handle
The Handheld Massager 2100H can be used eather with or without handle.
• Press the handle release buttons
• Loosen the hand strap
• Place the hand palm over the massager and adjust the strap.
4.5 Re-installing the handle.
• Press the handle release buttons
• Align the handle
• Release the handle release buttons
4.6 Changing the massage head
The Handheld Massager 2100H comes with 2 additional massage heads.
To change the massage heads:
• Disconnect the massager from the main power and make sure that the On/Off switch
is set to 'OFF'.
• Turn the massage head
• Pick another massage head.
• Align the massage head
stops turning.
Do not use excessive force. This might damage the attachement.
6
All manuals and user guides at all-guides.com
into the 220V~240V AC outlet. The wall outlet for
7
to position 'M' to activate the massage function.
2
to position 'M+H' to activate the massage function + heating.
2
together and pull the handle
A
.
4
A together
with the massager and push the handle into the main unit.
5
A
counter clockwise
3
with the screw and turn the massage head clockwise until it
3
to body temperature.
3
to fix the handle.
until it comes off the unit.
B
TOPCOM Handheld Massager 2100H
from the main unit.
5
2