Manufacturer'S Warranty - Siku QUIET Instrucciones De Uso

EN
MOUNTING
The fan is designed for ceiling or wall mounting to enable air extraction into the ventilation shaft or round air duct of
respective diameter (fig. 2). The fan mounting sequence is shown in fig. 3 11. The wiring diagrams are shown in fig. 12.
MAINTENANCE GUIDELINES
The product surfaces must be regularly cleaned from dirt and dust (fig. 14 19). For cleaning use a soft cloth or brush and
mild detergent water solution. Avoid water dripping on the electric components. Wipe the surfaces dry after cleaning.
TRANSPORTATION AND STORAGE RULES
Transport the product by any transportation vehicle in the manufacturer's original package.
Store the delivered product in the manufacturer's original packing box in a dry ventilated premise with the temperature
0 0
range from +5 C up to + 40 C and relative humidity less than 80%.
The storage environment must not contain dust, acid or alkali vapours that may cause corrosion of the product parts.

MANUFACTURER'S WARRANTY

By purchasing this product the customer confirms to have read and agreed to the terms, rules and requirements related to
operation, storage, transportation, mounting, adjustment, connection, maintenance and repair as well as warranty
obligations with respect to this product as set forth in the manufacturer's accompanying documentation to the product.
The manufacturing company sets forth the warranty period (service life) of the product as 60 months following the sale date
via retail network subject to the customer's ensuring compliance with the rules of transportation, storage, mounting and
operation of the product.
In case of any malfunction of the product through the fault of the Manufacturing company within the warranty period
(service life), the customer shall have the right to elimination of the manufacturing defects by means of warranty servicing
performed free of charge.
The warranty servicing implies performance of activities related to elimination of defects in the product aimed to provide
intended use of the product by the customer. The defects are eliminated either by replacing or repairing such a product
or a part (component) thereof.
NOTE: with the purpose of performing warranty servicing you please produce User Manual or other relevant substituting
document and the payment document as an evidence of the purchase with indication of the sale date. The product model
shall comply with that one specified in the User Manual or other relevant substituting document.
With the purpose of performing warranty servicing please contact the trade company where you purchased the product.
If warranty servicing on the spot proves impossible, you will be provided with the necessary information regarding
rendering of this service.
5