REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble the parts in
reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
2. Insert the clip in the install pack, and then
confi rm that it holds the line fi rmly.
Type A
Type A
Center of Transparent
Center of Transparent
coupler
coupler
clip A (1/4")
clip A (1/4")
(6.35 mm)
(6.35 mm)
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
DA68-03030A-01.indb 13
DA68-03030A-01.indb 13
All manuals and user guides at all-guides.com
2. Take off the cover ( 2 ) with the harness using a
3. Press the locking tab and separate the Wire
Type B
Type B
Dispenser
Dispenser
The Guide Lines
The Guide Lines
clip A (1/4")
clip A (1/4")
(6.35 mm)
(6.35 mm)
4. Remove 1 hex head bolt from each side with a
(1)
(1)
English - 13
fl at head screwdriver (-).
(2)
(2)
Connector.
socket wrench (10 mm).
2014. 5. 13.
2014. 5. 13.
2:15
2:15