Foreo BEAR Manual página 2

damaged skin.
• If you have had cosmetic surgery on your face.
• On or near children or those with reduced physical and mental abilities.
---------------------------------
• The safety of the device for use during pregnancy has not been established. If you are
pregnant, consult your physician before using this device.
• If you have a skin condition or any medical concerns, please consult a physician before use.
• If you have suspected or diagnosed heart disease, follow precautions recommended by your
physician.
• This device should not be used by children or those with reduced physical and mental abilities.
HOW TO USE BEAR
Before using your device:
• Charge BEAR
™
until fully charged. A fully charged BEAR
on a 1-minute treatment time per use. The intensity indicator lights under the universal power
button flash while the device is charging to indicate how much battery your device has. When
all of the indicator lights are lit, it means your device is fully charged.
• To unlock and register your device for first time use, download the FOREO For You app.
Connect to the app via Bluetooth on your smartphone, and press the universal button on
BEAR / BEAR
™
SAFETY & SECURITY:
To ensure the safety and security of your device:
1. Ensure the network to which your mobile phone is connected is safe.
2. Ensure the BEAR
3. Do not connect the BEAR
through Bluetooth.
4. Ensure optimal Quality of Service (QoS) of wireless function, by making sure your phone
supports Bluetooth Low Energy (BLE) with a version above 4.0.
5. Ensure that the operating range is less than 1 meter between your phone and your
BEAR / BEAR
™
CAUTION:
• BEAR & BEAR
™
• This device must be used with a legally marketed conductive primer.
Directions for use:
1. Clean and dry your face and neck carefully so there is no remaining residue of any kind.
2. Apply the primer to your skin, distributing it evenly across all the areas you wish to treat.
Massage until fully absorbed.
3. i) Press the universal button to activate microcurrent. The lights underneath the universal
button indicate the microcurrent intensity setting. You can change the microcurrent intensity
by quick pressing the universal button once for each level. To turn off T-Sonic
double press the universal button. Use the app to access a wider range of microcurrent
intensities. ii) Lightly press both metallic spheres to your face, and gently glide the device
across your cheekbones and forehead, around your lips, and over your jawline and neck as
desired. Make sure that both microcurrent spheres are touching your skin at all times. Always
glide the device slowly, in an upward motion, and with light pressure for enhanced results.
2
and BEAR mini
™ ™
& BEAR mini using the USB charging cable provided for up to 1.5 hours or
™
mini to sync your device to the app.
™
/ BEAR mini device firmware is up to date with the latest version.
™ ™
™
mini device.
™
mini must be completely dry before starting your microcurrent treatment.
™
/ BEAR mini should last for up to 90 uses, based
™ ™
/ BEAR mini devices to an unofficial application
™
pulsations,
™