Urmet IPERCOM VOG 5 Guía Rápida De Uso página 12

The "Recording" and "Divert" statuses are not configurable using video door phone Ref. 1761/6. The
video door phone passively acquires the "Recording" or "Divert" status if a MAX Ref. 1717/31, /32, /33,
/34 and /44 or a MAX Ref. 1717/21 or a
1741/1 configured as Master is present and one of the two states is activated on it.
/ : Icon indicating whether the MUTE function is disabled or enabled.
: Time display.
The screen switches off automatically after the time-out (approx. 10 seconds).
5. FEATURES
The following performances can also be performed through gestural commands (Gesture). For more
information, refer to the "Quick guide to gesture commands" supplied with the product.
5.1. RECEIVING AND ANSWERING A CALL FROM A CALLING
STATION
The video door phone will ring and the display will switch on when a call is received. The caller's image
will appear on the video door phone display. If there are more than one video door phone in the apartment
when a call is received, only the Master video door phone will display the caller's image. To view the caller's
image, on a Slave video door phone, press button
3
Press button To reject the incoming call.
Press the button
Press the button again to end the conversation and switch off the display.
5.2. DOOR OPENING FUNCTIONS
The video door phone allows the opening of any pedestrian door or garage door associated with the calling
station. With the video door phone at rest
mode or during an auto-on event
(1)
• the pedestrian door by pressing
12
to establish a conversation with the caller (the LED of the button will start flashing).
(with the calling station), it is possible to open:
(1)
Ref. 1761/31, /32 and /33 or a video door phone Ref.
on the Slave video door phone.
receiving a call (received from the calling station), in voice
(1) (1)
, the following page will appear on the display:
DS1761-001