Charging The Device - senya SYCK-VC022 Manual De Instrucciones

III. Charging the device
Caution - The original charger must be used when charging the device - Ensure that the
mains voltage is the same as the voltage listed on the rating label.
 Ensure that the device is switched off before charging it.
 Connect the charger to the charging station.
 Plug the charger into the socket.
 Slot the vacuum cleaner onto the charging station.
 When the device is charging, the LED indicator on the hand-held part will blink slowly. When
the device is fully charged, the LED indicator will remain lit.
 If there is a malfunction in the charging circuit, the LED indicator will blink quickly.
 When the device is fully charged, the electric circuit control will stop the charging process
automatically in order to protect the battery.
 It is normal for the charger to become slightly hot during charging.
 Unplug the charger in the event of a prolonged absence (holidays, etc.). Recharge the device
again prior to use, as the batteries may discharge themselves if left in storage for extended
periods.
20