Technical Specifications - tws EP002 Manual Del Usuario

EN

TECHNICAL SPECIFICATIONS:

Bluetooth version: 5.0
Wireless range: up to 10m
Frequency: 20-20kHz
Input voltage: 5V
Usage time: 2.5h
Stand-by time: 100h
Charging time: 1.5h
CHARGING STATION AND EARPHONES CHARGING
1. Use a USB cable to charge the charging station. Plug one end of the cable into an adapter
or a computer and the other end into a charging port. The LED diode lights up in red during
charging. After the device is fully charged, the LED diode turns off.
2. In order to charge the TWS earphones place them in a charging station. If the charging
station is charged, the LED indicator lights up in blue. Otherwise, the diode remains off.
After the earphones are fully charged, the blue LED indicator on the charging case turns off. The LED
indicator on the earphones turns red during charging and turns off when the earphones are fully
charged.
Note: Press the charging station button in order to check the battery level. Blue LED indicator shows
sufficient energy level, while the red one indicates that the level is low.
SYNCHRONIZATION
1. In order to synchronize one TWS earphone press and hold down the Multi-Function button
to power on the device – LED indicators light up in red and blue. It shows that the device is
ready for pairing. In a Bluetooth menu of your mobile device find and tap "6248". If the
pairing is successful, the LED indicator flashes every 5 seconds.
2. In order to synchronize both TWS earphones (for first connection only, all the following
synchronizations are made automatically) press and hold down the Multi-Function buttons
on both earphones until the LED indicators light up in red and blue, and then press and hold
down the Multi-Function button on one of the earphones, to enter pairing mode.
When synchronization of TWS earphones is successful, the LED indicator of the earphone
in use flashes red and blue, while the LED indicator of the other one flashes blue every
5 seconds.
In a Bluetooth menu of your mobile device find and tap "6248". If the pairing is successful LED
indicators of both earphones flash blue every 5 seconds. In order to turn off both devices press and
hold up the Multi-Function button on either TWS earphone.
Note: After removing TWS earphones from the charging case they turn on automatically.
There is no need to hold down the Multi-Function button.
TWS EP002