Samsung CM1929A Instrucciones Para El Usuario página 10

jtX`Y`h†l|TWYZ[`i†luU”GGwˆŽŒGXWGGt–•‹ˆ SGqˆ•œˆ™ GY_SGYWW_GGYaW_Gwt
Memory Pads Programming (continued)
Multi-stage
EN
1. Hold down PROGRAM LOCK(
PROGRAM(
u
Result :
2. Press appropriate NUMBER pad for the desired memory
number.
Result :
3. Select power level by pressing the POWER LEVEL pad or
DEFROST pad.
u
4. Press NUMBER pads to set the cooking time.
u
5. Repeat steps 3 and 4 for II or III stage memory
programming.
All manuals and user guides at all-guides.com
) and then press
) pad. Hold together for 2 sec.
Be sure to press the pads firmly.
PROG indicator appears in the digital display.
Selected memory program code appears
below the PROGRAM indicator.
Press the POWER LEVEL pad and DEFROST
pad one or more times until you get the desired
power level.
The maximum time according to each cooking
power level can be referred to in the title "Power
Levels and Time Variations" on page 6. The
NUMBER pads will not operate or respond when
you press a cooking time exceeding the
maximum value.
It is not possible to set a cooking time for longer
than the maximum time allowed on the chosen
program. It is advisable to press CANCEL and
to enter a new power level and cooking time.
6. Hold down PROGRAM LOCK(
PROGRAM(
Result :
Caution: Be sure to press the pads firmly in the right
7. When you want to program more, repeat the procedures
above again.
u
You can not set up the same
It operates as setting up sequence.
10
) and then press
) pad. Hold together for 2 sec once again.
PROG indicator and memory number indicator
blink 3 times in the digital display with a beep
sound. And then the display goes blank.
position.
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do
for memory cooking is to press the NUMBER
pad. Then the selected memory program
automatically starts cooking.
POWER LEVEL or DEFROST .