Congratulations. You have purchased a Regent 500 watt halogen
floodlight. This floodlight is perfect for security lighting or for illuminating
signs, recreational areas, and buildings.
What you need
• Screwdriver
• Adjustable wrench
What's included
• Light fixture (A)
• 500 watt halogen bulb (B)
• Mounting arm (C)
• Locknut (D)
• Coverplate (E)
What to know
• For outdoor use only.
• UL and CSA LISTED for wet
locations.
• Fixture must be connected to 120 Volt, 60 Hz power source. Any other
connection voids warranty.
• Fixture should be mounted to a grounded junction box mar ked for use
in wet locations.
• Keep away from flammable objects. Do not mount body of
fixture within 1" of any combustible material.
• The bulb and fixture get extremely hot during use .
• Always replace bulb with the same or lo wer wattage than the bulb
included. Installing a higher wattage bulb could create a fire hazard
and shorten the life of the bulb . Use of higher wattage bulbs will void
the warranty.
• Never touch the bulb with your bare hands . Handle the bulb with gloves
or a soft cloth. Oil from your skin can cause premature failure .
• For maximum bulb life, position light so that
the halogen bulb remains within 4 degrees of
horizontal.
• If lens is replaced, use only tempered safety
glass of equal thickness.
• Fixture should be installed by persons with experience in household
wiring or by a qualified electrician. The electrical system and the
method of electrically connecting the fixture to it must be in accordance
with the National Electrical Code and local building codes .
CGP500WL (Bronze)
WQ500, CWQ500 (White)
A
B
2
GP500WL,
C
D
E
4°