Technical Speciications - AEG EZ 5623 Instrucciones De Servicio

English
24
5. Place the brush against the edge of the gums. Brush
the outsides, the insides and the occlusal surface of your
teeth. Slowly guide the brush head from tooth to tooth.
period of a total of 2 minutes.
6. Shut off the device with the O switch.
NOTE:
of the gums.
you should contact a dentist.
Cleaning
CAUTIION:
Do not use sharp or abrasive cleaning agents.
1. Switch off the appliance before cleaning.
2. You may wipe the housing of the device with a slightly
damp cloth.
3. Pull off the brush attachment. Clean it under running
water after each use.
Docking station
WARNING:
Disconnect the mains plug before cleaning.
NOTE:
The docking station is splashproof.
1. You will need a sharp tool in order to loosen the docking
station from the wall mount.
There is a strap located at the center of the wall bracket' s
lower end. Use a sharp tool to press this strap towards
the wall while simultaneously pulling the docking station
upwards.
2. Regularly wipe the brush compartments with a damp
cloth and dry afterwards with a dry cloth.
cloth and dry afterwards with a dry cloth.
4. Let the brush compartments and lid dry completely
before closing the lid again.
5. Wait until the docking station has dried completely be-
fore connecting the mains plug again to the wall socket.

Technical Speciications

Model: ....................................................................................EZ 5623
Net weight: .............................................................................0.30 kg
Docking station
Power supply: .....................................................220-240 V~; 50 Hz
Power consumption:................................................................1.5 W
Water resistance: ........................................................................IPX7
Protection class: ................................................................................II
Toothbrush
Battery: .................................Ni-MH; type AA; 800 mAh; 1.2 V
Water resistance: ........................................................................IPX7
Protection class: ...............................................................................III
The right to make technical and design modiications in
the course of continuous product development remains
reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
Disposal
Battery
The toothbrush contains a nickel-metal hydride battery. Re-
move the battery before disposing of the appliance. Contact
our customer service if required.
CAUTION:
ies/accumulators.
1. In order to remove the battery, use a sharp tool to open
the lid at the bottom of the toothbrush.
2. Then pull the battery from the housing. If necessary, use
pliers as pulling aid.
3. Return the battery at a collection facility for the recycling
of waste batteries or hazardous waste. Contact your local
authorities for more information.
Environmental protection
end of its service life. Bring it to an oficial collection point
for recycling. By doing so, you help protect the environ-
ment.
-