EAS ELECTRIC EHC2200 Manual De Instrucciones página 16

Timer In the power-on mode, press this key to select the timed
shutdown setting. The timing indicator lightsup, the
temperature display icon lights off, and display screen
blinks and shows the rest time of last setting. Press "+" or
"-" keys to set shutdown time, the setting range is 0~24
hours. The machine confirms the time and quits the timing
setting state if without pressing within 5 seconds. If the set
time is 0, it means cancelling the timing setting; if the set
time is not 0, the machine shuts down automatically, enter
the idle mode and turns off the timing icon when reaching
the set time. Set again the time after time setting, and the
machine is retimed. In the idle mode, press this key to set
timing power-on, of the same operation as timing
shutdown. The time unit of the timer is hour.
Sway In the power-on mode, press this key to start swaying,
key
and press again to stop swaying.
Light screen off function
When the machine is on the working state, the screen automatically lights
off and operating mode icon retains up if without operation within 1 minute.
Press at the same time the key and "-" key for 2 seconds to close the light
screen off function. Press again at the same time the key and "-" key for
2 seconds to open the light screen off function.
Temperature sensor short circuit and open circuit protection
In whatever mode, when short circuit or open circuit protection occurs to
the temperature sensor, digital screen displays E1 or E2 and blinks
unceasingly, any key does not work, and buzzer rings for 10 times.
Safety protection
In the power-on mode, when room temperature Th exceeds 50 °C, the
system closes all outputs, the digital screen displays "FF" and blinks at the
frequency of 1 time per second, any key does not work, and only
power-off can quit protection.
Toppling over protection function
No matter in power-on or power-off mode, when the machine topples over,
the system immediately shuts down all heating components and displays
"E3", any key does not work.
6 V.1