Safety Instructions - Poppstar 1003524 Manual De Instrucciones

UK
Please read these instructions carefully before using the universal power supply.
CAUTION: Ignoring the safety and instructions for use listed here can lead to serious accidents, injuries or even property damage.
Includes
Universal power supply, manual
Specifications
Model
Input
Output
Output power
Plug connection
Cable length
Dimensions power supply

Safety instructions

• The product has no main switch: To remove it quickly in an emergency, only use it at easily accessible sockets.
• Always pull the adapter plug out of the socket directly at its base.
• Keep the product out of reach of children.
• Contains small parts that can be swallowed, keep away from small children!
• Never open the housing.
• Never cover the product.
• Never expose the product to extreme conditions such as heat/cold, moisture, direct sunlight, microwaves or mechanical
pressure.
• Never crush the power supply cable, never pull it over sharp edges or hot surfaces and never use it to carry the product.
• Do not modify or disassemble the product or accessories.
• Never repair damaged products yourself, please contact our technical support.
• Use the product only in dry indoor areas.
• WARNING short circuit hazard: Never insert objects into ventilation slots or connection sockets.
• WARNING fire hazard: Selecting a higher voltage than specified by the manufacturer can cause serious damage to both the
device and the power supply!
• CAUTION risk of injury from tripping: Make sure that nobody risks of tripping over the cable.
Instructions for use
1. Compare the specifications of all the devices you want to use to ensure their compatibility.
The voltage (in volts) of the device must match with the power supply (if the power supply provides more voltage than the
device requires, this may result in damage. If the voltage is too low, the device will not work).
The specified amperage (in amps) of the power supply is the maximum amount of amperage. If your device requires a higher
amperage than the power supply can provide, the power supply may be damage.
2. Connect your device to the power supply.
3. Then plug the power supply into a socket.
4. Disconnect both plugs after use.
1003524
100 - 240V AC
12V DC (2A)
24W
5.5*2.5mm
1.83m
88.5 x 43.3 x 18.5 mm
1004172
100 - 240V AC
12V DC (3A)
36W
5.5*2.5mm
1.83m
97.5 x 47 x 34.2 mm