Toshiba RAV-SM402MUT-E Manual Del Propietário página 7

Operation section
Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing
ON / OFF
button only.
12
2
5
3
1
FAN
button (Air volume select button)
Selects the desired air volume mode.
2
TIMER SET
button (Timer set button)
TIMER SET button is used when the timer is set
up.
3
TEST
button (Check button)
The CHECK button is used for the check operation.
During normal operation, do not use this button.
4
VENT
button (Ventilation button)
Ventilation button is used when a fan which is
sold on the market is connected.
• If "No function " is displayed on the remote
controller when pushing the Ventilation button, a
fan is not connected.
FILTER
5
RESET
button (Filter reset button)
Resets (Erases) "FILTER
6
SAVE
button (Power save operation)
No Function
7
SWING/FIX
button (Swing/Wind direction button)
Selects automatic swing or setting the louver
direction.
8
Operation lamp
Lamp is lit during the operation.
Lamp is off when stopped.
It flashes during operating the protection device
or abnormal time.
All manuals and user guides at all-guides.com
1 8
TEMP.
TIMER SET
TIME
FILTER
RESET TEST SET CL SWING/FIX
9
10
11
" display.
12
OPTION :
Remote controller sensor
Usually the TEMP . sensor of the indoor unit senses
the temperature.
The temperature on the surrounding of the remote
controller can also be sensed.
For details, contact the dealer from which you have
purchased the air conditioner.
6
ON / OFF
FAN MODE
SAVE VENT
UNIT LOUVER
ON / OFF
button
When the button is pushed, the operation starts,
and it stops by pushing the button again.
When the operation has stopped, the operation
lamp and all the displays disappear.
MODE
button (Operation select button)
Selects desired operation mode.
UNIT LOUVER
button (Unit/Louver select button)
Selects a unit number (left) and louver number
(right).
UNIT:
Selects an indoor unit when adjusting wind
direction when multiple indoor units are controlled
with one remote controller.
LOUVER:
No Function
TEMP.
button (Set up temperature button)
Adjusts the room temperature.
Set the desired set temperature by pushing
TEMP . or TEMP .
9
10
4
11
6
7
.
English-6