Orbegozo VP 8550 Manual De Instrucciones página 16

VP 8550
Filling opening
Fill the reservoir with water through the opening. Make sure not to exceed the maximum.
Temperature dial
Turn the dial to adjust the temperature based on the item to be ironed.
Temperature indicator
When the iron is heating up the indicator will light. When the iron reaches the desired
temperature it will turn off.
Steam sprayer
When the temperature indicator goes out, lightly press the steam spray and it will come out
through the soleplate. When you release the spray the iron will be used for dry ironing.
Steam jet
The steam jet can be activated by pressing the steam nozzle twice continuously.
Self-cleaning
The iron should be cleaned when the indicator lights up. Before you start, prepare a heat-resistant
•
container with a capacity of more than 300ml to collect the excess water, then put the iron in the
container.
Press the cleaning button for two seconds. When you hear the sound, stay away from the iron to
•
avoid being burned by the high temperature steam during the process. The iron will go into cleaning
16