Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
RADIO
Radio reception
.
1.
Press
FUNCTION
button
select RADIO
mode
2.Tune to required station by press BACK/TUNE DN or NEXT/ TUNE UP
Manual Tuning:
Press
BACK or NEXT and then release within 1 sec.
Auto Tuning:
Press the play/pause button enter the automatic channel
scan
mode, and to be put automatically sets.
Preset Channel:(FM 30 Preset memories)
(1) Press BACK/TUNE-DN or NEXT/TUNE-UP Select desired station.
(2) Press PROGRAM button once , The MEMORY number indicator begins steady in the display.
(3) Press PRESET-UP OR PRESET DOWN buttons to select the desired number.
(4) Press PROGRAM button to save that station.
(5) Repeat steps (1) to (4) procedures for other stations.
3.After end of program. press PRE-UP or PRE-DN to start play the frequency that you selected.
4.
Press [VOL-]or [VOL +] to adjust the volume.
5.Extend TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting.
6.Turn off the radio by press FUNCTION button select other mode or press power button to off the unit.
7.Switch on again after shut down,the memory frequency still exists.
All manuals and user guides at all-guides.com
EN-5
PROGRAM METHOD
(1)
Press the (PROGRAM) key at STOP mode, system will go to PROGRAM mode.
-The PRG icon and P01 will blink at 2 sec. This prompts the user to enter the first songs in the
program PLAY list.
(2)
CD/USB PROGRAM
the user can select the desire tracks by using
Once these keys are pressed, the Display will show the selected track.
1.After select the desired track, press [PROGRAM] key again and it will be stored in the memory.
Mp3 Maximum 99
and CD
Maximum 20 tracks can be programmed when Repeat
steps (2) to (3) procedures.
2.If press the [STOP] key during the program mode, then the selected TRACKs will be stored
in the memory and return to STOP mode (Continuous Play mode)
3.If press the [PLAY] key during the program mode, it will start the program PLAY mode.
PLAY start from P01 Track
Erasing a program
You can erase the content of the memory by:
- While playing, press STOP button twice.
- Opening the CD door
- Select the other mode.
USE IPOD
To listen to your IPOD with Mp3 music files.
1.Connect to the IPOD .
2.Press function selector to IPOD/AUX to supply power and play IPOD.
-Press PLAY/PAUSE button to play or pause playback;
-Press STOP button to stop playback;
-
Press
BACK or NEXT to select tracks of the iPod;
-
Press
and hold on BACK or NEXT more than 1.5 sec to forward or backward
search fast intra track;
-
Press
REPEAT button to repeat 1 track or repeat all tracks of the iPod.
NOTE:
Press
BACK button once briefly to return to the beginning of the current track.
While using the IPOD, it charges through connection base.
USE AUX
、
、
To listen music with a mp3 discman walkman
1.Connect to the AUX .
2.press function selector to AUX, the sound source of the mp3
or discman or walkman will output from the unit.
-
Press
the volume control to adjust the volume.
-The unit can't control the player.
Pre-dn / Pre-up
keys.
.
EN-6
Publicidad
Tabla de contenido
