Unscrew the wing nut from the centrifu-
gal separator.
Clean the centrifugal separator.
Changing the headlight bulb (option)
Unscrew the head lamps.
Take out the head lamps and pull out
the plug.
Note: Note the positions of the plugs.
Dismantle the head lamps.
Dismantle the head lamp casing and
hold it horizontally because the lamp
unit is not fastened.
Unlock the bracked and take out the
bulb.
Insert new bulb.
Reinstall in reverse sequence.
Changing the blinker bulb (option)
Note: Remove the glass of the direction-in-
dicator lamp from its casing to replace the
bulb.
Replacing fuses
Open the fuse holder.
Check the fuses.
Note: The fuses FU 01 and FU 14 are lo-
cated in the motor compartment.
FU 01
Main fuse
FU 02
Gas cylinder fill level
indicator
FU 03
Safety relay
Multifunction display
FU 04
Blinker switch
FU 05
Time relay
Seat contact switch
FU 06
Ventilator motor hy-
draulic cooler
FU 07
Program selection
switch
Waste container func-
tions
FU 08
Horn
FU 09
Left lighting
FU 10
Right lighting
FU 11
Front work lights (low
beam)
FU 12
Vibrator system
Beacon lamp
FU 13
Water pump
Capacitor ventilator
Cabin lighting
Wiper
3. Side brushes
Blower motor cabin
FU 14
Fanmotor capacitor
Replace defective fuses.
Note: Only use fuses with identical safety
ratings.
60 A
5 A
10 A
10 A
EN
30 A
EC Declaration of Conformity
We hereby declare that the machine de-
25 A
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
10 A
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
10 A
Product:
Type:
7,5 A
Relevant EU Directives
7,5 A
2006/42/EC (+2009/127/EC)
2004/108/EC
10 A
2000/14/EC
Applied harmonized standards
EN 60335–1
20 A
EN 60335–2–72
EN 55014–2: 1997+A1: 2001+A2: 2008
Applied national standards
10 A
CISPR 12
Applied conformity evaluation method
2000/14/EC: Appendix V
Sound power level dB(A)
Measured:
Guaranteed: 107
40 A
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
CEO
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2011/03/01
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
12
-
Ride-on vacuum sweeper
1.186-xxx
Head of Approbation
Warranty
29