Manual Mode - Electrolux PURE A9 Manual De Instrucciones

OPERATION INSTRUCTIONS
TO TURN ON THE APPLIANCE
9 Plug in the appliance and tap (touch and release)
the " " button to turn it on.
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality, during this time the
Loading LED and the Air quality light will pulsate
slowly in white. Each time the appliance is turned
on the SMART mode is activated automatically
and the fan runs in low speed until the air quality
analysis is complete.
SMART MODE
10 In this mode, the appliance will choose the fan
speed automatically, based on the air quality level.
This is the default mode each time the appliance
is turned on.
NOTE: In "SMART" mode the fan speed cannot be
changed manually.
About the Air quality light
11 The appliance has an air quality sensor that
analyzes the air quality.
The air quality light will show the real-time air
quality through different colors of light. As shown
below:
LIGHT'S COLOR PM 2.5 (μg/m
Green 0-11
Yellow 12-34
Orange 35-54
Red 55-149
Purple 150-249
Maroon >250
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality each time the appliance
is turned on. During this time, the air quality light
will pulsate slowly in white.
Very high humidity conditions in the room might
produce condensation in the sensors. This could
affect the accuracy of the sensor readings.

MANUAL MODE

12 Tap the "MODE" button to switch the appliance to
"MANUAL" mode. In this mode, the fan speed can
be changed manually by touching the Fan speed
slider.
NOTE: The fan speed will change gradually after a
new fan speed is selected.
8
3
) AIR QUALITY
Good
Moderate
Unhealthy for
Sensitive Groups
Unhealthy
Very Unhealthy
Hazardous
WIFI FUNCTION
13 This appliance is equipped with a WiFi module,
which you can access to the full functionality of
the system via our smartphone app. Download our
app and follow the instructions for how to connect
it with your appliance. When the connection is
stablished, the WiFi indicator will light up.
CHILD LOCK FUNCTION
14 The Child lock can be activated and deactivated
by long pressing the On/Off and the Mode button
simultaneously for 4 seconds. This function can
also be activated or deactivated via the app.
When the Child lock is activated, the control panel
of the appliance cannot be interacted with and
the Child lock indicator light up.
FILTER CHANGE INDICATOR
15 The filter change indicator will light up to remind
you to change the filter. Refer to the instructions
in the app or the Electrolux website on
where to purchase replacement filters. Ensure
the plastic protective bag is removed from the
replacement filter before use. After the filter is
replaced, the filter change indicator will turn off
automatically.
NOTE: The HEPA Filter cannot be washed, it can
only be replaced.
IONIZER FUNCTION
16 The ionizer function can only be activated and
deactivated by using the app (smartphone
application). When this function is activated,
the ionizer indicator lights up and the appliance
generates ions to improve the unit's performance
and with it the room's air quality.
SCHEDULE FUNCTION
In the app (smart phone application) you
can set different schedules, for example that the
fan speed goes down during night time and then
goes back to normal speed during day time.
CARE AND CLEANING
Unplug the appliance before cleaning to prevent
shock or fire hazards.
17 The plastic parts of the appliance may be cleaned
with an oil-free dry cloth or by using a vacuum
cleaner with a soft brush.
18 The fabric on the appliance cannot be removed.
Clean the fabric by using an oil-free dry cloth or a
vacuum cleaner with a soft brush.
www.electrolux.com