Additional Safety Instructions; Use And Operation - WETRA-XT Asist AE5PK110 Instrucciones De Uso

ADDITIONAL SAFETY INSTRUCTIONS

Please read these safety instructions before use and
keep them in a safe place.
! - This symbol indicates the risk of injury or damage
to the device.
Hold the machine by the insulated surfaces of the
handle when performing work that could allow the
cutting tool to come in contact with hidden lines or its
power cord.
Contact of live cutting tools can lead to voltage being
applied to the metal parts of the machine and causing
electric shock.
Do not touch the cutting area and saw blade with your
hands.
Before use, always make sure that it is portable
the band saw was clean.
If you notice anything unusual, always
stop working immediately.
Always make sure that the tools are in use before
using them
all components properly and safely mounted.
When attaching or removing the saw blade
always be careful.
Always keep your hands out of the cutting path
saw blade.
Always wait for the engine to reach before cutting
full speed.
Always keep the handles dry, clean and free of oil and
grease. Hold the tool firmly while working.
Always be careful, especially with recurrences
monotonous operations. Always make sure you are
correct the position of the hands relative to the saw
blade.
Never remove the workpiece stop.
Keep a distance from the end pieces, which fall off
after cutting. They can be hot, sharp and / or heavy.
This could cause serious injuries.
Vents often cover moving parts and should be kept
free. Loose clothing, jewelry or long hair can get
caught in moving parts.
WARNING!
This power tool generates during operation
electromagnetic field. This field may limit active or
passive medical implants in certain circumstances.
To reduce the risk of serious injury or death, we
recommend that persons with medical implants con-
sult their physician and the manufacturer of medical
implants before operating a power tool.
Use only accessories and attachments
specified in the operating instructions, resp. those
whose clamping is compatible with the device.
- Use protective equipment against noise, dust and
vibration !!!
SAVE THESE SAFETY INSTRUCTIONS !!!
DESCRIPTION (A)
The device is primarily intended for cutting metal
pipes or profiles.
Any other use or modification of the device is
considered as use contrary to the intended purpose
and poses a serious risk of injury.
+ Pivoting saw blade with angular scale for precise
oblique cuts
+ Can be used separately from the base
+ Easy attachment to work. table thanks to the stand
+ Electronically adjustable cutting speed suitable for
steel, stainless steel, iron, various types of alloys,
copper, PVC, Teflon, etc.
+ Soft grip handle
+ Soft start
1 light switch
2 speed adjuster
3 switch
4 workpiece stop
5 workpiece stop screw
/ 6 / key
7 saw blade
8 saw blade clamping lever
9 handle
10 thumbscrew on the handle
11 protective covers
12 locking screws
13 rubber wheels
14 guide rollers
15 handle on the vice
15q quick adjustment
16 vice
/ 17 / screws
18 adjustment of the cutting angle
19 long wing screw
/ 20 / cutting angle adjustment screw
21 safety pin
22 swivel arm
23 work light
24 saw blade
Accessories:
1 saw blade
1 key
1 stand
Pictograms on the product packaging:
a) Power supply values
b) Idle speed
c) Max. cutting capacity
d) Power consumption
e) Saw blade

USE AND OPERATION

ASIST tools are intended for home or hobby use only.
The manufacturer and importer do not recommend
using this tool in extreme conditions and under high
loads.
Any additional requirements must be the subject of
37